Drop kit (box & board) for Phantom 3 Pro/Adv

Description

Drop and delivery device

Drop is a simple mod that allows you to carry and drop anything you want using Phantom 3 Pro/Adv. It could be used for:

• Rescue missions
• Fishing and hunting
• For parties and fun
• Delivery

Features

• Powered from central battery. No additional power source is required
• Controlled from main remote controller. Drop works at any distance where RC control is available
• Lightweight
• Safe. Payload is fixed. It doesn’t provoke drone oscillations.
• Easy to install (no need to open the shell, no soldering)
• Can carry anything inside closed box

Package

• Drop board
• Box with servo control
• Cables

How to install

Drop mod is very easy to install, no disassembly is required. Just connect several cables

1. Installing Drop board
   1. Disconnect rubber dumpers from gimbal on side of USB connector
   2. Disconnect 8-pin and 6-pin cables from gimbal and connect them to border sockets on Drop board.
   3. Connect 6-pin and 8-pin cables from Drop board to gimbal
   4. Connect rubber dumpers
   5. Fix board with double sided tape
2. Installing box
   1. Fix box with nylon fasteners
   2. Connect servo cable to Drop board

How to use

Configure one of custom buttons to switch horizontal and vertical camera position.

• Before flight place your cargo inside box and close it with servo.
• During a flight face camera down (90 degrees) and select place to drop
• Click custom button twice. Camera should go up and down. After it box will be opened.